blacksmith

Events Search and Views Navigation

Event Views Navigation

Today

Filters

Changing any of the form inputs will cause the list of events to refresh with the filtered results.

  • Beginner Blacksmithing Workshop

    Hart Moore Blacksmithing Studio 1049 Wharton Furnace Road, Farmington, PA, United States

    Get Hooked on Forging! Instructor: Addison DeLisle No Experience-Beginner $695 Member | $725 Non-Member $60-$110 Materials and Studio Fees *Pre-approved for Act 48 Credit by PAEA Forging a cusp hook teaches new blacksmiths many of the fundamental processes of blacksmithing: drawing a consistent taper, spreading, shouldering, bending, and cross section changes. In this workshop, you will […]

    $725

  • Beginner Blacksmithing: First Time Forging Workshop

    Peters Valley School of Craft 19 Kuhn Road, Layton, NJ, United States

    In this introductory workshop we will lay the foundations for a journey into the blacksmithing world. This class is designed for people who have never used a coal forge before, but more seasoned beginners are more than welcome. We will focus on starting and maintaining a coal fire, and basic hammer control techniques. Everyone can […]

    $475

  • Blacksmithing for Teens Workshop

    Touchstone Center for Crafts 1049 Wharton Furnace Road, Farmington, PA, United States

    Come and learn how to swing a hammer at the anvil, work a coal forge, and forge hot steel – all in a fun, enthusiastic, and inclusive environment! Throughout this workshop, you will learn many of the basic processes in blacksmithing, like tapering, twisting, bending, and punching. Everyone will walk away with their own hand-forged […]

    $850

  • Beginner Blacksmithing Workshop

    Hart Moore Blacksmithing Studio 1049 Wharton Furnace Road, Farmington, PA, United States

    Traditional Process–Contemporary Design Instructor: Douglas E. Wilson No Experience-Beginner $695 Member | $725 Non-Member $125-$175 Materials and Studio Fees *Pre-approved for Act 48 Credit by PAEA Join this workshop to learn and practice age-old forging processes and joinery techniques such as drawing out, upsetting, bending, twisting, plus forge welding, hot collars, and riveting. We will also […]

    $900

  • Forging a Medieval Tool – Blacksmithing Workshop

    Hart Moore Blacksmithing Studio 1049 Wharton Furnace Road, Farmington, PA, United States

    AUG 5-9 | 5-DAY (MON-FRI) Forging a Medieval Seax (Knife) Instructor: Dr. Andrew Welton No Experience-Beginner $695 Member | $725 Non-Member $115-$165 Materials and Studio Fees The "seax" is the iconic knife of the European Early Middle Ages. Participants will forge a seax that follows the proportions, geometry, and metallurgy of historical originals. We will […]

    $890

  • Blacksmithing Class – Foundational Techniques

    John C. Campbell Folk School 1 Folk School Road, Brasstown, NC, United States

    Learn the basics of building and maintaining a fire, as well as hammer control, and start making small projects-hooks, leaves, and decorative pieces. With your foundational skills in hand, progress to larger items including fire pokers and shovels. Work with several types of forge welds and unravel the mystery of tempering. By the end of […]

    $792

  • Beginning Blacksmithing Workshop

    The New Agrarian School 990 McCaffrey Road, Bigfork, MT, United States

    Try blacksmithing for the first time or brush up on your skills in this basic blacksmithing class. Students will be guided through a series of exercises that are designed to teach the language of forging and build your confidence working with hot metal. As you grow more confident, we will progress to making useful items […]

    $975

  • Traditional Knife Forging Class – Blacksmithing

    John C. Campbell Folk School 1 Folk School Road, Brasstown, NC, United States

    Build a knife by applying only forging techniques and construction processes used by smiths of old. We will emphasize using hammer skills to move and shape hot metal and shaping and surfacing with files. Also, learn about hardening and tempering by heat, color and eye, using hand tools to construct and rivet wooden handles. Finish […]

    $660

  • Advanced Blacksmithing Course

    John C. Campbell Folk School 1 Folk School Road, Brasstown, NC, United States

    2-Week Course Following the tradition of Francis Whitaker, students will have the opportunity to focus on fine ornamental iron work for a personal, predesigned project. In addition to working on individual projects, students will share and learn from the techniques used in their fellow classmate’s work. Students must be able to perform a dropped-tongs forge weld, make upset square corners, and freehand scrolls. Predesigned projects must be submitted to instructors before class begins. Please […]

    $1,584

  • Blacksmithing Workshop: Forging Your First Blade

    Peters Valley School of Craft 19 Kuhn Road, Layton, NJ, United States

    This class is designed for first timers in the blacksmith shop who have an interest in knifemaking. We will focus on basic forging techniques and how they are applied to bladesmithing. The knives we make will be simple camping style blades with an emphasis on forging not fine finish work. Due to the short nature […]

    $465

  • Beginning Blacksmithing Workshop

    Peters Valley School of Craft 19 Kuhn Road, Layton, NJ, United States

    This workshop will cover how to start a coal fire, learn basic hammer control, and basic blacksmithing techniques. We will also cover safety in the blacksmith shop and learn about hand tools that blacksmiths utilize. Everyone will have the opportunity to choose from different objects that they can forge and take home. No prior experience […]

    $475

  • Beginning Blacksmithing Workshop

    Peters Valley School of Craft 19 Kuhn Road, Layton, NJ, United States

    Experience moving hot steel with the power of your hammer swing! In this workshop, participants will learn how to blacksmith using a coal forge, anvil, hammer, and other hand tools. Through forging J hooks with decorative ends, participants will get a chance to work through many iterations of hooks and walk away with their own […]

    $475

  • Beginning Blacksmithing Workshop

    Peters Valley School of Craft 19 Kuhn Road, Layton, NJ, United States

    This workshop will cover how to start a coal fire, learn basic hammer control, and basic blacksmithing techniques. We will also cover safety in the blacksmith shop and learn about hand tools that blacksmiths utilize. Everyone will have the opportunity to choose from different objects that they can forge and take home. No prior experience […]

    $475

  • Women’s Blacksmithing I (March)

    Tillers International 10515 E. OP Ave, Scotts, MI, United States

    Women’s Blacksmithing follows the same skill building principles as Blacksmithing I but is designated for women students only. This introductory two-day class moves students through the fundamentals of blacksmithing: basic manual skills, heat treating, forge welding, and identification of “found” steels. Safety, tools, techniques, materials, terminology, and shop set-up will all be explored. With an […]

    $395

  • Beginner Blacksmithing Class (March)

    New England School of Metalworking 7 Albiston Way, Auburn, ME, United States

    Beginner Blacksmithing "Lighting the Fire" with Lucas Damen Class runs: March 25-28 Tuition: $600 Material fee: $50 Skill level: Beginner and up In this four day class we will be covering all the basics for the beginner blacksmith. From tool introductions and ergonomics to hands on forging techniques and the process of planning and executing […]

    $600

  • Blacksmithing I (April)

    Tillers International 10515 E. OP Ave, Scotts, MI, United States

    This fast-paced introduction to smithing moves you through the fundamentals: basic hammer skills, heat treating, forge welding, and identification of “found” steels. By the end of the second day students will be turned loose to make interesting forged pieces with the support and collaboration of a blacksmith with 30 years of experience. Safety, tools, techniques, […]

    $395

  • Beginning Blacksmithing for Women, Trans & Non-binary Individuals

    Peters Valley School of Craft 19 Kuhn Road, Layton, NJ, United States

    This class is for individuals who would like to learn to forge in a physically and emotionally safe environment. Participants will learn proper usage and techniques for both hand tools and power tools while making figurative spatulas. This workshop will focus on forging at the anvil, power hammer, and cold working techniques. A figurative spatula […]

    $500

  • Weeklong Iron Intensive Workshop

    Carrie Blast Furnaces National Historic Landmark 801 Carrie Furnace Blvd, Pittsburgh, PA, United States

    May 26 @ 11:00 am - May 31 @ 7:00 pm Monday through Saturday 11:00 a.m. – 7:00 p.m. Visiting artist information is forthcoming. This workshop features extended shop time onsite at the Carrie Blast Furnaces and in-depth instruction / assistance catered to the needs of each individual. Participants will have the chance to learn and experiment […]

    $500

  • Beginner Blacksmithing Class (June)

    New England School of Metalworking 7 Albiston Way, Auburn, ME, United States

    "Lighting the Fire" with Lucas Damen Class runs: June 10-13 Tuition: $600 Material fee: $50 Skill level: Beginner and up In this four day class we will be covering all the basics for the beginner blacksmith. From tool introductions and ergonomics to hands on forging techniques and the process of planning and executing several small […]

    $650

  • Forging a Viking Axe Workshop

    Peters Valley School of Craft 19 Kuhn Road, Layton, NJ, United States

    Participants in this workshop will learn how to forge and heat treat their own Viking Style Bearded Axe, first forging the tools needed in order to forge that axe. The class will start with the forging of a mandrel to form the axe eye, and a pair of knee tongs that will aid in holding […]

    $970

  • Blacksmithing Open Studio: June 23, 2025

    Monday, 6:00 pm to 9:00 pm Are you looking to hone your forging and blacksmithing techniques? Open Studio sessions at the Carrie Blast Furnaces provide flexible, self-guided time to build on your skills, test out new ideas, or put those final touches on a previously made piece. Anvils, forges and necessary tooling will be provided, […]

  • Blacksmithing Level 2 Class (July)

    New England School of Metalworking 7 Albiston Way, Auburn, ME, United States

    Class runs: July 22-25 Tuition: $550 Material Fee: $50 Skill Level: Seasoned beginner and up or previous NESM beginners course This course is designed for someone who has completed a beginner level course and ready to continue in the blacksmith's craft. The course will be structured around several sound fundamentals of practicing the blacksmith's craft; […]

    $600

  • Beginners Blacksmithing Class (August)

    New England School of Metalworking 7 Albiston Way, Auburn, ME, United States

    Class runs: August 5-8 Tuition: $550 Material fee: $50  Skill level: Beginner and up   The goal of this class is familiarize the student with the tools and techniques that are employed by the blacksmith.  We will start with a tour of the shop and discuss the tools and their uses, including coal and gas […]

    $600

  • Blacksmith Bellows – Repair and Restoration Workshop

    Historic Eastfield Village 104 Mud Pond Road, East Nassau, NY, United States

    This workshop will repair, re-leather, and restore the blacksmith shop bellows at Historic Eastfield Village. Participants in the workshop will learn how a traditional two-chambered blacksmith bellows works and is used. The bellows will have new leather stitched together and fit to the sides. Duration: 3 Days Date: August 14th - 16th 2025 Includes: Materials […]

    $450

  • Blacksmithing II Class (August)

    Tillers International 10515 E. OP Ave, Scotts, MI, United States

    This two-day class builds on skills learned in Blacksmithing I. Students will work through several hands-on projects, improving their manual skills and expanding their techniques. Helpful coaching speeds the learning progress. Students are welcome to bring their own idea and projects to work on! Click here to learn more about this class, location, and registration. […]

    $395

  • Beginner Blacksmithing Workshop (September)

    Peters Valley School of Craft 19 Kuhn Road, Layton, NJ, United States

    This beginner-friendly class focuses on the fundamentals of blacksmithing while crafting your own custom grilling tools including a steak flipper, egg spoon, and a set of BBQ tongs—a perfect addition to your grilling or kitchen arsenal! We’ll start by making a steak flipper, learning how to forge tapers and create smooth, elegant curves. This project […]

    $650

  • Blacksmithing Level 3 Class (September)

    New England School of Metalworking 7 Albiston Way, Auburn, ME, United States

    Course runs: September 16-19 Tuition: $550 Material fee: $50 Skill level: Seasoned Beginner and up, ideally having had Beginner and Level 2 OR Equivalent! This course is designed for someone who has completed both a beginner level course as well as the Blacksmithing Level 2 and can’t get enough of the blacksmith's craft. If you […]

    $600

  • Parent and Teen Blacksmithing Class

    Tillers International 10515 E. OP Ave, Scotts, MI, United States

    Many teens see blacksmithing in movies, video games, and online and become curious about this timeless trade. Tillers offers a two-day blacksmithing class specifically for young people ages 12 to 16, accompanied by a parent. This class introduces teens to the fundamentals of the craft: fire tending, shaping, heat treating, and more. It is also […]

    $625

  • Blacksmithing II Class (November)

    Tillers International 10515 E. OP Ave, Scotts, MI, United States

    This two-day class builds on skills learned in Blacksmithing I. Students will work through several hands-on projects, improving their manual skills and expanding their techniques. Helpful coaching speeds the learning progress. Students are welcome to bring their own idea and projects to work on!   Click here to learn more about this class, the location, […]

    $395

  • Blacksmithing III Class

    Tillers International 10515 E. OP Ave, Scotts, MI, United States

    Designed for students who have taken Blacksmithing I & II, this two-day class teaches new skills such as forge brazing and ornate punch & chisel work. Supervised time in the shop with a myriad of tools will provide students the space to create additional projects.   Click here to learn more about this class, the […]

    $395